Polyaire ZoneMaser ZoneTouch V2, User Manual

Page: 7 / 20

ZONEMASTER ZONETOUCH V2 ZONE CONTROL SYSTEM - User Manual
5
4) Automated Group Control
Automated on/off control for each group is an important feature of the ZoneTouch V2
system. This system has three program scenarios, one for weekdays (Monday to
Friday), one for Saturday and one for Sunday respectively.
Each program scenario has 4 programmable events per day: on time 1, off time 1, on
time 2 and off time 2. Each program event can be enabled and disabled and the time
can be adjusted as desired. All four events are disabled in the factory default with
settings as listed in the table below. Users can create up to 4 programs using the
scenarios and different event time slots.
NOTE: A group can have up to a maximum of 4 zones. Your installer would
have already set up your zones and groups.
3.2 Adjusting airflow for a group
• The damper opening percentage for every group can be adjusted to control
the amount of airflow at every outlet between 10% and 100% of the balanced
value (setup by Installer) at 10% increments.
• Touch or buttons on the home screen to increase or decrease the
percentage opening for the corresponding group.
• The airflow will be unadjustable if the Turbo function is active. Pressing
and will not change the opening percentage.
NOTE: The Turbo function cannot be programmed. It is activated manually from
the touch screen as needed.
On time 1 Off time 1 On time 2 Off time 2
Monday to Friday 6.30AM 8.00AM 5.30PM 10.00PM
Saturday
7.30AM 12.30PM 6.00PM 11.30PM
Sunday 7.30AM 12.30PM 6.00PM 11.30PM