Configuration and Management
13
To make changes with the system web interface:
1
Access the system web interface.
2
Go to the page containing the parameter you want to change.
3
Enter your changes in the system web interface.
Always click the
Submit
button to save your changes before going to another page.
A message displays when a system reboot is required. When you finish making changes, click
Reboot.
Configuring VVX D230 with the Setup Wizard
The Setup Wizard web page provides a convenient way to set basic system parameters on your D230 base
station.
You can change the following parameters from the Setup Wizard page:
Setup Wizard Parameters
Parameter
Description
System Management
LocalTimeZone
Local time zone.
AdminPassword
Administrator password is case-sensitive and can contain uppercase and
lowercase letters, numerals, and special characters.
Note: If the default password is set, a warning message displays in the top-right
corner of the web page.
ITSP x Profiles (for x = ITSP A through ITSP D). Note: Your system has ITSP A – H.
ITSP x SignalingProtocol
Signaling protocols for this ITSP. Choose from:
•
SIP
•
Google Voice
ITSP x SIP ProxyServer
Host name or IP address of the SIP proxy server.
ITSP x SIP ProxyServerPort
Destination port to connect to the SIP server. Don’t choose a port at random.
ITSP x DigitMap
A digit map to restrict the numbers that can be dialed or called with this service.
Maximum length is 511 characters.
Outbound Calls (for Phone1 and Phone2)
Phone1 PrimaryLine
This parameter indicates to your handset which voice service is considered as
the primary line when dialing out from your system.
Phone1 DigitMap
Digit map to limit dialable numbers on this handset.
Phone1 OutboundCallRoute
Routing rule for outbound calls made via this handset.
Attendant PrimaryLine
This parameter indicates to your handset which voice service is considered as
the primary line when using the Auto Attendant.
Voice Services (for n = SP1 through SP4, and OBi). Note: Your system has SP1 – 8.