Call Features
37
Set the Call Park Pickup Prefix
After users park a call, they can use a retrieval code that includes a pickup prefix and the parking slot number
to retrieve the call from the parking lot. For example, 7xx. The default pickup prefix is 7, but you can
configure the prefix in the system web interface.
To enable
local
call park:
1
In the system web interface, go to
DECT Wireless > System > Local Call Park
.
2
In the
Default
column, clear the check box for the
PickupPrefix
parameter.
3
In the
Value
column for the
PickupPrefix
parameter, select a prefix between 2 and 8.
4
Click
Submit
.
5
Reboot your system when you complete your changes.
Enable Call Hold Transfer to Call Park
For shared lines, you can enable the system to automatically convert a call hold into a call park. When a
user places a call on hold, the call is parked in an automatically selected parking lot instead of the normal
call hold function. This enables the user to park a call without knowing where the call is parked.
To enable call hold transfer to call park:
1
In the system web interface, go to
DECT Wireless > System > Local Call Park
and verify that call
park is enabled (
LocalCallPark
is set to True).
2
Go to
Voice Services > SPn Service > Share Line Features
, where
n
is any voice service
configured for your base station.
3
In the
Default
column, clear the check box for
X_LocalShareHoldIsPark
.
4
In the
Value
column of
X_LocalShareHoldIsPark
, check the box to set this parameter to True.
5
Click
Submit
.
6
Reboot your system when you complete your changes.
View Local Call Park Status
Enabling local call park also enables local call park status, which provides a parking lot status page on the
system web interface for your D230 base station. This page shows calls currently parked by handsets
registered to your base station, if any.
To see local call park status:
»
In the system web interface, go to
Status > Parking Lot Status
to see calls parked by the handsets
registered to your base station.