Getting Started
10
To connect to Ethernet and a PC:
1
Plug an Ethernet cable into the Ethernet port on the base station. If the base station powers on, you
have PoE, and the base station automatically obtains an IP address via DHCP.
If the base station doesn’t power on, connect its 5V power adapter.
2
Optionally, connect your PC to the base station’s PC port.
Pair Handsets to Base Stations
Before you use your D230 system, you need to pair your handsets to your base station. You can do this
before you provision your lines. You can pair up to 10 handsets per base station.
Your base station supports up to seven active calls.
To pair your handsets to your base station:
1
On the handset, choose
Menu > Settings > Registration
.
2
Select
Register
.
3
Press and hold the base station’s
Find
button for 5 seconds.
4
On the handset, choose
Yes
to confirm registration.
5
Repeat for each handset.
Access the System Web Interface
After pairing a handset to your base station, use the system web interface to configure and make changes
to your system.
To access the system web interface:
1
On the handset, choose
Menu > Settings > Basestation Info
. The base station’s IP address
displays.
2
Enter the base station’s IP address in a local PC web browser.
3
When prompted, enter the user name and the password.
The default user name is
admin
, and the default password is
admin
.
Configure the Primary Line
The primary line is the default service used to make calls when not using an explicit access code prefix.
The primary line offers these services:
●
SP1–8 Service: SIP-based service. By default, the primary line is SP1.
●
OBiTalk Service: Peer-to-peer service provided free with all system models.
Your handset can simultaneously manage two calls maximum.