21
B L U E T O O T H O P E R A T I O N
insert your music device in the drawer. Use one of the 2 adapters
available to connect your device then push the drawer back in place. If
operating an iPod/iPhone® device, please connect to USB connector then
press
MODE button
to change to iPod/iPhone® mode. If you chose the
3.5mm plug adapter press
MODE button
to change to AUX Input 2 mode,
then refer AUX Operation on page
22
for further instructions. For
iPod/iPhone® mode, refer operation instructions below:
SELECTING SONGS
Press
or
button
to select next or previous song. Press and Hold
or
button
to fast forward or rewind a song.
PAUSING/PLAYING
Press
4 button
to pause the play. Press
4 button
again to resume play.
RANDOM
Press
2 button
to start random song play
REPEAT
Press
3 button
sequentially to repeat current playlist, song or turn repeat
SWITCHING TO BLUETOOTH MODE
If a device is already paired:
Press
MODE button
to change to Bluetooth (BT) mode.
If there is no device paired
the display will show “Bluetooth Not Connected”
please follow instructions below on how to pair your device
1) Make sure you are close enough to MRD87i
2) Open Bluetooth setting on your device
3)
Choose “Poly-Planar” from the list of available Bluetooth link
4) Enter “
0000
” as the Bluetooth password (if required)
5) Once connected, you can now start playing your favorite music from your
music device.
6)
Operating Range is up to 30’ (will vary, dependent on installation)
IMPORTANT NOTE:
Some Bluetooth-enabled devices may take more than 45 seconds to initiate
after pairing or does not pair at all. If this happen, try to turn off the stereo
and the device and pair it again.