19
then push left encoder to go to next digit and rotate to get 5, then push left
encoder again and rotate to get 1.
-
Press
FUNCTION/SELECT knob
to confirm and play.
SELECT A CHANNEL BY CATEGORY
Press and hold
AS/PS button
to enter category selection menu. Use the
FUNCTION/SELECT knob
to navigate to all the categories available then
when done selecting a category press
FUNCTION/SELECT knob
once to
confirm. The unit will only play the selected category channels until you go
back in category select menu and select “All channels” category.
SELECTING THE FREQUENCY BAND
In SiriusXM® mode, press
BAND button
to locate the desired band. The
reception band will change in the following order:
S1 S2 S3
AUTOMATIC MEMORY STORING
The
PRESET buttons
can be used to store 6 channels in each band (S1,
S2 and S3) for convenient access to your favorite channels.
1.
Select the desired band.
2. Select the channel you want to store in memory, then press and hold one
of the preset buttons for 3 seconds until the corresponding preset button
number appears.
3. Repeat steps 1 and 2 to program additional channels.
PARENTAL CONTROL
You can lock any SiriusXM® channels you do not want others to have
access without your permission. The default code is "0000". In case you
forget your code please perform
FACTORY DEFAULT RESET
.
-
GUIDE
ON
HOW
TO
ENTER
THE
CODE
USING
THE
FUNCTION/SELECT KNOB
Rotate
FUNCTION/SELECT
knob
to
enter
first
digit,
push
FUNCTION/SELECT knob
once and rotate to enter second digit, press
FUNCTION/SELECT
knob
to
enter
third
digit
and
push
FUNCTION/SELECT knob
again and rotate to enter last digit. When done,
press
FUNCTION/SELECT knob
to confirm.
-
TO LOCK A CHANNEL
Select a channel that you wish to lock then enter in menu and select “Lock
Channel”. Enter the code then press
FUNCTION/SELECT knob
to
confirm.
