20
i P o d ® / i P h o n e ® O P E R A T I O N
-
TO UNLOCK A CHANNEL
Tune to desired locked channel by entering the correct password. Then
press
MENU button
to enter in the
menu and select “Unlock Channel” then
enter code again to permanently unlock channel.
-
TO UNLOCK ALL LOCKED CHANNEL
Enter in menu and select “Unlock All Ch”. You will be prompted to enter the
code. After entering the code all channels will be unlocked
-
TO EXIT RESTRICTED MODE
Press
BAND button
to manually enter the channel you wish to unlock then
press FUNCTION/SELECT knob. Enter the code then press
FUNCTION/SELECT knob
to confirm. Now you can access all locked
channels without entering password until shutdown the unit.
-
TO CHANGE THE CODE
Enter in menu and select “New Code” “Enter Code” will show on the display.
Enter the old code then press
FUNCTION/SELECT knob
to confirm
“New
Code” will show on the display. Enter your new code then press
FUNCTION/SELECT knob
again “Repeat Code” will show on the display.
Repeat the code and press
FUNCTION/SELECT knob
to confirm.
-
TO RESET SIRIUS FACTORY DEFAULT SETTINGS
Press
Menu button
and select “Factory Default” then enter parental control
code to confirm. If you forget parental control code, please use
FACTORY
DEFAULT RESET
to reset radio.
DISPLAY INFORMATION
Press
AS/PS button
to change current displayed info on display. You can
rotate through Channel Info, Artist Info, Track Info, Content info, Category
info.
SWITCHING TO iPod®/iPhone® MODE
If a device is already connected:
Press
MODE button
to change to iPod®/iPhone® mode.
If there is no device connected the display wi
ll show “No Device” please
follow instructions below on how to connect your devices
Turn on your DMD device then open the front panel to connect the
accessory cable to the connector on the right side of the device drawer then
