POLTI Vaporetto SV440_DOUBLE, Instruction Manual

Page: 30 / 90

17. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The appliance does not turn on. No power. Check that the appliance has
been connected to the mains, as
indicated in Section 1.
No steam is coming out. Out of water.
Appliance turned off.
Disconnect the appliance from
the mains, fill the water tank
and wait about 15 seconds, af-
ter which use the appliance.
Check that the appliance has
been connected to the mains,
as indicated in Section 1.
The appliance is on but relea-
ses little steam.
The steam is set to the
minimum level.
Turn the steam adjustment
knob to increase the flow.
The appliance releases too
much water on the floor.
Steam adjustment dial
set to the maximum.
Reduce the flow of steam to
the minimum. If necessary, mo-
mentarily stop the disburse-
ment of steam, while conti-
nuing to brush the surface.
Frescovapor deodorant is not
released when using steam.
Deodorant selector in
OFF position.
Out of Frescovapor.
Place the selector in the ON
position.
Fill the dispenser with Fresco-
vapor.
Steam too damp using Fre-
scovapor.
The steam is mixing with
Frescovapor.
Stop the dispensing of Fresco-
vapor as desired, to reduce the
humidity of the steam.
If problems persist or are not listed above, please contact a Polti Authorised Service Centre
(www.polti.com for the updated list) or contact Customer Services.
E
N
G
L
IS
H
| 30 |