check the symbols on its label, for the
instructions provided by the manufacturer.
Check, based on the following table, the most
appropriate type of ironing:
3. STEAM IRONING
3.1 Make sure that chapter 1 has been
completed and regulate the temperature of
the iron (7) as described in section 2
3.2 Wait for the “Steam Ready” indicator light
and “Iron Heating” indicator light to turn off.
3.3 Adjust the steam flow by turning the knob
in a clockwise direction to increase the jet of
steam. Turning it in an anticlockwise direction
reduces the steam flow.
3.4 Press the steam button (8) on the iron to
make steam come out of the holes on the
plate. Releasing the button, the flow stops.
Proceed to iron the garments.
3.5 To have a continuous jet of steam move
the button forward (9). The steam will
continue to come out even when the button
is released. To interrupt the supply, move the
button backward.
4. VERTICAL IRONING
It is possible to use the iron vertically to
remove creases from fabrics and/or to
freshen up the fibres, eliminating possible
residual odours.
Hold the iron vertically, push the steam
button (8) and touch the fabric slightly with
the soleplate, if the type of fabrics allows it.
5. DRY IRONING
Make sure that chapter 1 has been completed,
leaving the boiler switch off and regulate the
temperature of the iron (7) as described in
section 2.
6. ECO FUNCTION
Thanks to the ECO function, Vaporella
automatically sets the steam pressure for a
considerable energy saving, while keeping an
optimum performance for ironing even all the
most resistant fabrics (cotton/jeans/linen).
To activate or deactivate the ECO function,
just press the “0 - 1” (
) switch on the
appliance (10). The pressure indicator light
turn off when the right pressure is reached.
During dry ironing, take care not to push the
steam release button on the Iron since some
water drops can come out from the soleplate.
WARNING: Do not place the hot iron on any
surface. Vaporella is equipped with an iron
rest mat with soft non-slip inserts designed
to resist high temperatures.
The indicator lights “Iron heating” and “Steam
ready” turn on and off during use. This
indicates that the electrical resistor has
started to work to keep the pressure of the
boiler steady. This is a normal occurrence, and
it is therefore possible to continue ironing.
When first using the steam, there may be
some drops of water leaking out of the plate,
this is due to imperfect thermal stabilization.
We therefore recommend that the first jet of
steam be directed onto a cloth.
High temperature – cotton, linen:
Set the iron temperature adjustment knob
to the position •••
Medium temperature – wool, silk:
Set the iron temperature adjustment knob
to the position ••
Low temperature – synthetic, acrylic, ny-
lon, polyester:
Set the iron temperature adjustment knob
to the position •
- Do not iron
- Steam ironing and steam treatment not
allowed
WARNING: For low temperature we do not
recommend the use of steam since water
could come out from the holes on the
soleplate.
For
medium
temperature
alternate the use of steam and dry ironing
to avoid water leaking from the holes on the
soleplate.
Divide
the
laundry
according
to
the
symbols
on
the
garment
labels
or
according to the kind of fabric. Always start
ironing with the garments that require the
lowest temperature, in order to reduce the
waiting times and avoid the risk of burning
the fabrics.
When first using the steam, there may be
some drops of water leaking out of the plate,
this is due to imperfect thermal stabilization.
We therefore recommend that the first jet of
steam be directed onto a cloth.
The indicator lights “Iron heating” and “Steam
ready” turn on and off during use. This
indicates that the electrical resistor has
started to work to keep the pressure of the
boiler steady. This is a normal occurrence, and
it is therefore possible to continue ironing.
E
N
G
L
IS
H
| 22 |
