2. IRON TEMPERATURE
ADJUSTMENT
Before ironing an item of clothing, always
check the symbols on its label, for the
instructions provided by the manufacturer.
Check, based on the following table, the most
appropriate type of ironing:
3. STEAM IRONING
3.1 Make sure that chapter 1 has been
completed and regulate the temperature of
the iron (6)-(7) as described in section 2.
3.2 Wait for the “Steam Ready” indicator light
(7) and “Iron Heating” indicator light to turn
off.
3.3 Press the steam button (10) on the iron to
make steam come out of the holes on the
plate. Releasing the button, the flow stops.
Proceed to iron the garments.
3.4 Only for Vaporella Forever 609-610 to
have a continuous jet of steam, press and
move the continuous steam jet button
backwards (11). The steam will continue to
come out even when the button is released.
To interrupt the supply, move the steam
button forward (11).
Only for Vaporella Forever 615 Pro to have a
continuous jet of steam move the the
continuous steam jet button forward (12). The
steam will continue to come out even when
the button is released. To interrupt the
supply, move the button backward (12).
4. VERTICAL IRONING
It is possible to use the iron vertically to
remove creases from fabrics and/or to
freshen up the fibres, eliminating possible
residual odours.
Hold the iron vertically, push the steam
button (10) and touch the fabric slightly with
the soleplate, if the type of fabrics allows it.
5. DRY IRONING
5.1 Make sure that chapter 1 has been
completed and regulate the temperature of
the iron (6)-(7) as described in section 2.
6. OUT OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank has been
used up, steam will stop being released.
To restart operations just fill the water tank
again as described in the section 1.
7. GENERAL MAINTENANCE
Before carrying out any maintenance on the
device, always unplug it from the power
mains making sure that the product has
cooled down before proceeding.
High temperature – cotton, linen:
Set the iron temperature adjustment knob
to the position •••
Medium temperature – wool, silk:
Set the iron temperature adjustment knob
to the position ••
Low temperature – synthetic, acrylic, ny-
lon, polyester:
Set the iron temperature adjustment knob
to the position •
- Do not iron
- Steam ironing and steam treatment not
allowed
ATTENTION: For low temperature we do not
recommend the use of steam since water
could come out from the holes on the sole-
plate. For medium temperature alternate the
use of steam and dry ironing to avoid water
leaking from the holes on the soleplate.
Divide the laundry according to the symbols
on the garment labels or according to the
kind of fabric. Always start ironing with the
garments that require the lowest tempera-
ture, in order to reduce the waiting times
and avoid the risk of burning the fabrics.
When first using the steam, there may be
some drops of water leaking out of the pla-
te, this is due to imperfect thermal stabiliza-
tion. We therefore recommend that the first
jet of steam be directed onto a cloth.
The indicator lights “Iron heating” and “Steam
ready” turn on and off during use. This indica-
tes that the electrical resistor has started to
work to keep the pressure of the boiler
steady. This is a normal occurrence, and it is
therefore possible to continue ironing.
WARNING:
Do not place the hot iron on any
surface. Vaporella is equipped with an iron
rest mat with soft non-slip inserts designed
to resist high temperatures.
When ironing dry, pay attention not to press
the steam button, since water could leak
from the plate.
WARNING: This operation must always be
done
after
having
disconnected
the
appliance from the mains.
E
N
G
L
IS
H
| 22 |
All manuals and user guides at all-guides.com