POLTI unico MCV80 total clean & turbo, Instruction Manual

Page: 41 / 139

For steam cleaning and vacuuming, use the
2-in-1 windows and upholstery brush with the
sponge cap attached (21), then connect the
2-in-1 brush to the handle or the telescopic
tube.
Make sure that Chapters 1 and 2 have been
carried out and begin the cleaning
operations.
It is possible to adjust the intensity of the
steam by using the +/- buttons (see Chapter
4); for this type of surface we recommend
the minimum level of steam.
The steam and vacuum functions can be used
either at the same time or by alternating
them.
Combined use of steam and suction allows
the most efficient sanitising of the surface,
dissolving dirt and removing germs and
mites; it also brightens the colour of fibres
and dries surfaces more quickly.
PROGRAMMED MODE
only for UNICO MCV85
For this type of surface there is a pre-set
cleaning program, see Chapter 6.1.
12. CLEANING BATHROOM
FIXTURES, GROUTING AND
KITCHEN WORKTOPS
STEAM ONLY FUNCTION
Ensure that Chapter 2 has been followed.
12.1 Connect the concentrator accessory to
the handle. For greater abrasive action, a
bristly round brushcan be attached to the
concentrator.
12.2 It is possible to adjust the intensity of the
steam by using the +/- buttons (see Chapter
4); for this type of surface we recommend
the maximum level of steam.
STEAM - VACUUM COMBINED FUNCTION
to sanitise and dry the surface
12.3 Connect the suction nozzle to the
concentrator accessory (22) and activate the
suction function to begin vacuuming
immediately, removing dirt thanks to the
concentrated steam jet.
PROGRAMMED MODE
only for UNICO MCV85
For this type of surface there is a pre-set
cleaning program, see Chapter 6.1.
13. CLEANING FURNITURE AND
DELICATE
SUCTION ONLY FUNCTION
For suction only, connect the 2-in-1 suction
lance to the handle in position 1 (with bristles)
(23), thereby making it possible to remove
the dust from the surfaces.
Make sure that Chapter 1 has been carried out
and begin the cleaning operations.
It is possible to adjust the suction power by
moving the cursor on the handle.
STEAM ONLY FUNCTION
For steam cleaning only, make sure that
Chapter 2 has been performed.
It is possible to adjust the intensity of the
steam by using the +/- buttons (see Chapter
4); for this type of surface we recommend
the minimum level of steam.
Press and hold the steam trigger on the
handle and direct the jet onto a cloth.
Use the steamed cloth to clean the surface,
avoiding prolonged use on the same spot.
14. OTHER GENERAL USES
14.1 BRIGHTENING UP CURTAINS AND
DRAPES
Mites and dust can be removed from curtains
and drapes by steaming the fabric directly
from the handle. The steam is able to remove
odours and brighten up colours, allowing the
fabric to be washed less frequently.
For this surface, set the steam to the
minimum level.
14.2 REMOVING STAINS FROM CARPETS
AND UPHOLSTERY
Connect the concentrator accessory without
the bristly round brush; direct the steam
directly onto the stain with the greatest angle
possible (never vertically to the surface to be
cleaned) and place a cloth beyond the stain
to collect the dirt that has been “blown” away
Ensure that the rubber frame is inside the ac-
cessory.
For the MCV85 model, the different coloured
brushes allow for a different colour for each
surface or environment.
WARNING: Do not direct the steam jet di-
rectly onto surfaces.
WARNING: Before cleaning the surface,
always do a test on a hidden part and see
how it reacts to the application of steam.
WARNING: Before cleaning the surface,
always do a test on a hidden part and see
how it reacts to the application of steam.
WARNING: Steam.
Risk of scalding!
E
N
G
L
IS
H
| 41 |