POLTI unico MCV80 total clean & turbo, Instruction Manual

Page: 37 / 139

E
N
G
L
IS
H
| 37 |
treated as detailed in Chapter 4.
2.6 When the boiler is turned on, the steam
indicator light flashes: the boiler is heating
up. When the indicator light is constant, after
around 5 minutes (13) the appliance is ready
for steam function use.
2.7 The handle has a safety button which
prevents involuntary activation and
accidental steam delivery (14). Should the
appliance be left momentarily unguarded
when the appliance is activated, move the
safety button to the “steam lock” position
(14-A). To resume delivery, move the button
to the initial position (14-B) and press the
steam trigger on the handle (15).
3. PREPARATION FOR USE OF
COMBINED STEAM / SUCTION
FUNCTION
The steam and suction functions can be used
at the same time to wash and sanitise the
surfaces and then dry them. For the
combined function, prepare the product as
described in Chapters 1 and 2.
4. STEAM ADJUSTMENT
It is possible to adjust the intensity of the
steam using the +/buttons. (16). Here are
some tips for regulating it:
• Maximum level: for resistant floors and
surfaces, to remove limescale, stains and
grease;
• Medium level: to clean windows, floors and
clean and brighten rugs and carpet;
• Minimum level: to clean parquet and
laminate, delicate fabrics, upholstery, sofas
and mattresses, etc. and to steam plants.
5. MULTIBRUSH
Depending on the surface to be cleaned
(rugs/carpet, parquet and delicate floors,
hard floors and tiles) and the function that
you want to use (suction, steam, steam and
suction at the same time) with or without the
cloth holder, select the most suitable position
(A-B-C) based on the type of cleaning, by
pressing the appropriate pedal:
A - no insert
B - rubber inserts
C - bristle inserts
The specific label present on the appliance
and shown below indicates how best to use
the Multibrush brush based on the type of
surface and cleaning function.
KEY:
SURFACES
CLEANING FUNCTION
During cleaning operations, we recommend
the use of the cloth when you want to wash
and sanitise the floors so that the dirt
loosened by the steam is collected by the
cloth.
The cloth can also be used with the combine
steam / suction function.
In particular for cleaning delicate floors, such
as parquet, the cloth ensures no damage is
made to the surface being treated. If it does
not dry completely because the cloth has
been soaked by the steam, we recommend
going back over the surface with a dry cloth.
We recommend using the special push/pull
handle to move the appliance more easily
during cleaning operations. Do not use the
push/pull handle to lift the appliance.
We recommend using the accessories hol-
der, to be attached to the appliance (7) or
directly to the push/pull handle (8), to have
the accessories close at hand during the
cleaning operations.
WARNING: When first operating steam, the-
re may be some drops of water mixed with
the steam due to temperature imbalances.
Direct the first jet of steam onto a rag.
A A A
C B A
+
VACUUM STEAM
C A
+
A
+
STEAM & DRY
+
HARD
FLOORS
RUGS
CARPET
DELICATE
FLOORS
VACUUM
STEAM
STEAM & DRY
+
VACUUM
STEAM STEAM /
DRYING
Only use the cloth and special holder with the
brush in position A.