POLTI unico MCV80 total clean & turbo, Instruction Manual

Page: 40 / 139

textile surfaces, recommended for removing
hair and animal fur from rugs and carpet.
STEAM ONLY FUNCTION
For cleaning only with steam, set the
Multibrush
to position A (no insert) by
pressing the pedal. Make sure that Chapter 2
has been carried out and begin the cleaning
operations.
It is possible to adjust the intensity of the
steam by using the +/- buttons (see Chapter
4); for this type of surface we recommend
the medium level of steam.
STEAM - VACUUM COMBINED FUNCTION
to refresh and dry the surface
For steam cleaning and vacuuming, set the
multibrush to position A (no insert) by
pressing the pedal.
Make sure that Chapters 1 and 2 have been
carried out and begin the cleaning
operations.
It is possible to adjust the intensity of the
steam by using the +/- buttons (see Chapter
4); for this type of surface we recommend
the medium level of steam.
It is possible to adjust the suction power by
moving the cursor on the handle.
Combined use of steam and suction allows
the most efficient cleaning of the surface,
dissolving dirt and removing grease, germs
and mites; it also brightens the colour of
fibres and dries surfaces more quickly.
PROGRAMMED MODE
only for UNICO MCV80
For this type of surface there is a pre-set
cleaning program, see Chapter 6.2.
11. CLEANING UPHOLSTERY
(mattresses, sofas, car interiors, etc.)
SUCTION ONLY FUNCTION
For suction alone and depending on the
surface to be treated, connect one of the
following accessories to the handle:
The 2-in-1 windows and upholstery brush
without removing the rubber insert, makes it
possible to vacuum all types of fabric
practically and quickly.
The 2-in-1 suction lance (in position 2) (23) to
vacuum the tightest and hardest to reach
spaces.
The Mini Turbo Brush to deep clean the fibres
of the fabrics by also removing fur and hair.
Suction nozzle to remove dust and surface
dirt.
Make sure that Chapter 1 has been carried out
and begin the cleaning operations.
It is possible to adjust the suction power by
moving the cursor on the handle (4).
STEAM ONLY FUNCTION
For steam cleaning only, attached the 2-in-1
windows and upholstery brush with the
sponge cap attached (21), then connect the
2-in-1 brush to the handle or the telescopic
tube.
Make sure that Chapter 2 has been carried
out and begin the cleaning operations.
It is possible to adjust the intensity of the
steam by using the +/- buttons (see Chapter
4); for this type of surface we recommend
the minimum level of steam.
STEAM - VACUUM COMBINED FUNCTION
to sanitise and dry the surface
WARNING: Before cleaning leather or fa-
brics with steam, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
To avoid any dirt in the dirt collector causing
bad smells (especially where liquids are va-
cuumed and/or steam is used), we recom-
mend emptying and cleaning after every use
according to the methods described in
Chapter 17.
WARNING: Before cleaning leather or fa-
brics with steam, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
Ensure that the rubber frame is inside the
accessory.
WARNING: Before cleaning leather or fa-
brics with steam, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
IT
A
L
IA
N
O
E
N
G
L
IS
H
| 40 |