POLTI Moppy Instruction Manual Download Page 23

Page: 23 / 28

ϠҢ

ISH

| 23 |

1.4 The mop handle is height-adjustable: grasp
the two parts of the aluminium handle and turn
the upper part anti-clockwise to release it, then
adjust to the desired height and complete the
operation turning the upper part clockwise (10),
firmly tighten.
1.5 Fill the water tank of the base: press the up-
per door PUSH (11) to open it, fill up to Max ca-
pacity 0.7 l (12) and close by pressing the door
again.

This  operation  must  always  be  carried  out
with the power cable disconnected from the
mains.
1.6  Unwind  the  power  cable  completely  and
connect it to an appropriate socket (13).
The  red  power  indicator  light  will  come  on
(14)  (

). After a few seconds Moppy is

ready.

2. FLOOR CLEANING AND SANITISING

Use  the  product  on  surfaces  that  have  pre-
viously swept or vacuumed.
Ensure that section 1 has been followed.
2.1 Attach the microfiber cloth supplied to the
mop. To make it easier to attach, the cloth has
an  easy  lock/release  system  to  avoid  having
to bend over and use your hands. Just place
the cleaning side of the cloth on the floor and
rest the mop on top of it (15-16).
2.2  Place  the  mop  with  cloth  onto  the  base,
aligning the arrow of the brush with the arrow
of  the  base  (18).  Misalignment  of  the  arrows
prevents Moppy from functioning.
2.3 When the brush is properly resting on the
base, the base will start delivering steam onto
the  cloth.  Steam  delivery  is  signalled  by  the
flashing red indicator light (14).
The green indicator light (

) (19) will come

on after about 20 seconds indicating that the
cloth  has  been  sanitised.  The  delivery  of
steam  can  be  extended  to  further  dampen
the cloth.
The  first  time  it  is  used,  we  recommend  lea-
ving  the  mop  on  the  base  for  an  additonal
few  seconds  in  order  to  ensure  the  cloth    is
steamed evenly.
2.4 Clean floors by moving the mop over the
surface to be treated.
When the cloth appears to be dry, return the

mop to the base and re-steam the cloth.
The indicator light (

) (19) will come on af-

ter about 20 seconds indicating that the cloth
has been sanitized.
It  is  however  always  possible  to  leave  the
mop  on  the  base  longer  so  as  to  steam  the
cloth  more.  For  particularly  porous  or  rough
floors, it is recommended to extend the stea-
ming  time  so  the  cloth  is  sufficiently  steam-
charged.
2.5 The cloth can be replaced at any time du-
ring cleaning operations.
2.6 Standby parking: you can place the mop
on the base without activating steam delivery
during  cleaning  operations;  place  the  brush
with  the  arrow  facing  outwards  (20)  and  in-
sert the telescopic tube into the lock  (23).

3. CLEANING VERTICAL SURFACES

Moppy can clean and sanitise all vertical wa-
shable surfaces, such as walls with tiles, mar-
ble coverings, shower interiors, cabinet doors,
etc.
3.1 Attach a clean microfiber cloth to the mop,
then steam the cloth as described in points
2.2 - 2.3.
3.2 When the cloth is ready, clean the surface
to be treated and return to the base to steam
the cloth again whenever necessary.

4. DUST CATCHING FUNCTION

WARNING: Do not add other substances or

additives to the tank.

Before using Moppy on delicate surfaces

check that there are no foreign objects that

may cause scratches between the cloth and

the surface.

Wait for the cloth to cool before removing it

from the mop. Simply place a foot on the tab

of the cloth and pull the mop upwards to re-

move the cloth (17).

WARNING: Do not use the mop without the