荆
ｖ
ɻ
4.1 To remove dust from surfaces, attach the
dry microfiber cloth to the mop as per point
2.1, then attach the electrostatic cloth: place
the cloth on the floor and rest the mop on top
of it, then secure the electrostatic cloth by
hooking it in the buttons on the top of the
mop (21-22).
4.2 Dust the floors by moving the mop.
4.3 After cleaning, remove the electrostatic
cloth and dispose of it in an appropriate wa-
ste bin.
Moppy is compatible with the XXL electrosta-
tic cloths commonly found on the market.
5. OUT OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank has been used
up, the steam will stop flowing. To restart
operations just fill the water tank again as de-
scribed in the section 1.
6. GENERAL MAINTENANCE
Ensure that Moppy is switched off and di-
sconnected from the mains.
Wait for the appliance to cool.
To clean the outside of the appliance, use
only a damp cloth and tap water.
Do not use detergents of any type.
The supplied microfiber cloths can be washed
following the instructions on the label, while
the electrostatic cloths are disposable.
7. STORAGE
7.1 Disconnect Moppy from the mains.
Wait for the appliance to cool.
7.2 Remove the moist cloth from the mop.
7.3 Place the mop over the base with the ar-
row pointing outwards (Standby Parking po-
sition) (20) and insert the telescopic tube into
the specific lock of the base handle (23).
7.4 Wind the power cable around the special
cable hook (24).
WARNING: This operation must always be
done after having disconnected the applian-
ce from the mains.
WARNING: Do not grasp, lift, carry or tilt the
product from the base when still hot. Wait
for it to cool.
EN
GL
ISH
| 24 |
MOPPY - M0S11488 - 1R03_FEV 1000-950.qxd 23/03/2017 10:26 Pagina 24
