background image

8

GG1

ONE-YEAR LIMITED WARRANT Y

This Polsen product is warranted to the original purchaser to be free from defects in materials and workmanship under normal 
consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs 
later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the 
provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. 
Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty 
provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or 
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED 
WARRANTIES,  INCLUDING  BUT  NOT  LIMITED  TO  ANY  IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR 
PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Polsen Customer Service Department to obtain a return merchandise authorization (“RMA”) 
number, and return the defective product to Polsen along with the RMA number and proof of purchase. Shipment of the defective product 
is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.polsenaudio.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group. 
www.gradusgroup.com

Polsen is a registered trademark of the Gradus Group. 

©

 2018 Gradus Group LLC. All Rights Reserved.

Summary of Contents for RM-800









Reviews: