6
For the best recording results, the microphone should point directly at the sound source.
Vocalists and announcers should be positioned approximately 6 to 12 inches from the microphone. For close
vocal miking, use the included pop filter to prevent vocal pops or plosives.
To attach the pop filter, snap it onto the stem just below the mic capsule, and make sure it’s directly in front of
the microphone.
HIGH-PASS FILTER AND -10 DB PAD
High-Pass Filter
To prevent low-end rumble like noise from air conditioners, ducts, fans, and room ambience, use the
included key to move the switch to the
position and activate the filter.
-10 dB Pad
The -10 dB pad provides 10 dB of attenuation for high-volume sources that can produce distortion like
singers, live speeches, or band rehearsals. Use the key tool to move the switch to the -10 dB position and
