![background image](http://html.mh-extra.com/html/polsen/rm-800/rm-800_product-manual_1575107005.webp)
5
MOUNTING THE MICR OPHONE
1. Screw the shock mount onto the threaded post of a mic stand.
For 5/8-inch posts, remove the adapter bushing from the shock mount’s socket.
2. Once the shock mount is secure, loosen the locking ring on the bottom of the shock mount, and insert the
base of the microphone though the mounting hole.
3. Tighten the locking ring until secure.
4. If needed, adjust the angle of the microphone by loosening the locking knob on the shock mount. Be sure to
hold the microphone with one hand while performing this operation.
RECORDING WITH THE RM-800
1. Turn the speaker volume down, and use an XLR cable to connect the microphone to a preamplifier, mixing
board, or recorder.
Note
:
Recording directly into a computer requires an XLR-to-USB adapter such as the Polsen XLR-USB-48.
2. Turn the phantom power on.
3. Turn the speaker volume up, and set the input level on the recording device.