6
You can also mount the CS-88A onto a boom pole via the 3/8 in. threaded socket in the shoe-mount adapter.
To mount the microphone onto a boom pole, make sure the CS-88A is turned off and follow these steps
:
1.
Match the threaded post on the end of the boom pole with the
threaded socket in the CS-88A’s shoe-mount adapter.
2.
Screw the boom pole into the threaded socket until secure.
3.
Insert the microphone’s 3.5 mm audio connection into the female end
of a 3.5 mm stereo extension cable (sold separately).
Tip
:
Use the wire guides to keep the audio cable in place on top of the
boom pole.
Note
:
Make sure the extension cable is long enough to reach from your audio recorder to the microphone at
the end of the boom pole.
4.
Insert the extension cable’s 3.5 mm male audio connection into the audio input jack of your audio recorder.
To turn the microphone on, slide the power switch to the ON position. The power LED will glow green to indicate
that the power is on. When battery power is low, the power LED will glow red.
OFF
ON
-10dB
+
10dB
0