42
Setting displaying when power on
Press [
] key, use [
] / [
] key to select menu 22, LCD displays
“OPENSET/OFF”. Press [
] key to enter the setting mode, use [
] /
[
] key to choose voltage or message, confirm by [
] key, press [
] key to exit. If select “DC”, battery voltage will be displayed. If select
“MSG”, message will be displayed on LCD.
There is no message displays when no message has been set or select
“OFF”. About message setting, please refer to menu 24.
Battery voltage
Press [
] key, use [
] / [
] key to select menu 23, LCD displays
current battery voltage.
Setting power on message
When standby, press [ ] key, use [ ] / [ ] key to select menu 24,
LCD displays “PON. MSG”.
Press [ ] key to enter the setting mode, power on message blinks.
Press [ ] / [ ] key to select the desired letters.
Press [
] key to switch to the next editable letter, press [
] to
cancel current letter, and return to the last editable letter.
Confirm by [
] key and press [
] key twice to exit.
Setting shift frequency
When standby, press [
] key, use [
] / [
] key to select menu 2s,
LCD displays “OFFSET/0.000”.
Press [ ] key to enter the setting mode.
Input desired shift frequency. It can be set from 0.000-99.995MHz.
Confirm with [
] key.
Press [ ] / [
] key to select “ON/OFF”, confirmed by [
] key.
Note: Make sure open increase/decrease frequency function before setting
shit frequency.
1.
2.
1.
2.
3.
4.
5.
