40
TOT setting
Press [ ] key, use [ ] / [ ] key to select menu 13, LCD displays “TOT/
OFF”. Press [ ] key to enter setting, use [ ] / [ ] key to set transmit
time, they are 30S.60S......270S/OFF. If choose “OFF”, there is no time limita-
tion on transmitting, Confirm by [
] key, press [ ] key twice to exit.
Busy Channel lock
Press [ ] key, use [ ] / [ ]key to select menu 14, LCD displays “BCL/
OFF”. Press [ ] key to enter setting, use [ ] / [ ]key to
select “WAVE” / “CALL”.
When select “WAVE”, radio will stay on the CH which receiving carrier wave
signal till signal disappears. When select “CALL”, radio stays on the CH which
receiving carrier wave and signal both should be the same.
Confirm by [
] key, press [
key twice to exit.
Transmit end tone on/off
Press [ ] key, use [ ] / [ ]key to select menu16, LCD displays “RO-
GER/OFF”. Press [ ] key to enter setting, use [ ] / [ ]key
to select “ON” / “OFF”.
When select “ON”, will hear beep “dididi” when you press PTT key.
Confirm by [
] key, press [
] key twice to exit.
Monitoring
Press[ ] key, then use [ ] / [ ] key to select menu 17, LCD displays
“DW/OFF”. Press [[ ] key to enter the setting, through [ ] / [ ] key
to choose “ON” / “OFF”, confirm by[
] key, press [
] key to exit.
If select “ON”, signal will be received when radio is under radio receiver
mode. After talking, radio back to radio receiver mode.
If select “OFF”, radio stays in radio receiver mode, can’t receive any signal.
