Politec S.r.l. | Manual SADRIN – Ver. 3.3
3
2.
MOUNTING
1.
Remove devices from carton pipe by applying pressure to side of it to facilitate spillage;
2.
Remove top caps and remove IR plastic profile for aluminum.
If you need to shorten profile, cut it paying attention to avoid that any metal slag falls onto boards;
3.
Insert square gasket in base cap;
4.
Insert the cable gland gasket into groove;
5.
Cut cable gland gasket at desired diameter;
6.
Insert base cap in aluminum profile, paying attention that gasket is attached to metal;
Summary of Contents for SADRIN
Page 1: ...Installation manual...
