Politec S.r.l. | Installation manual NAT SENSOR – Ver. 1.10.1
6
WALL MOUNT WITH “L” BRACKET
1.
Insert the shielded alarm cable into the slots of the bracket angle and fasten it to the wall;
2.
pass the cable through the mounting plate;
3.
fix the plate to the fastening bracket angle;
4.
Drill hole in the rubber nut and slide inside the cable;
5.
Screw the base on the plate;
6.
Fix the NAT motherboard on the support base and connect wires;
7.
After the wiring and operation test close (7) NAT sure that the seals and the O-rings are present and not
damaged to ensure the integrity of the product.
1
2
3
4
5
6
7
