Politec Srl | Manual MANA DT SMA + DT3
–
Ver 2.5.2
33
9.4.2
OPTICAL RX
1 2 3 4 5 6 7 1 2 3 4 5 6
RX1
ON
RX2
ON
RX3
ON
RX4
ON
Through DIP 7 in ON (as default) and lighted LED POWER is occur the correct operation of RX optics.
The power of the heaters is set by default to 24V; you can use 12V by changing the configuration of the jumper
(SW4).
The voltage can be both AC and DC.
In jumper J4 is possible to read the signal value in volts.
Note: The settings relating to addresses are already set to Default.
24V
12V
HEATERS SUPPLY
TEST SIGNAL POINT
J4
(FEEBLE) SIGNAL LED
TAMPER
RX1: Not in use in
the case of column
with 3RX
RX1 and RX2: Not
in use in the case of
column with 2RX
