It is recommended that the brightness of the camera preview screen (1)
matches the brightness of the printed photograph. Use dial (10) to
adjust the brightness of the preview screen if necessary.
If you are not satisfied with the colour balance seen in your prints, you
need to check that the camera is calibrated to suit your particular studio
set up. The camera colour balance has been factory preset to 3200K
for tungsten flood light and 5500K for strobe light. However lighting
used and personal preference will vary from one user to another
meaning fine adjustment may be necessary.
Camera Colour Calibration is split into two stages and must be carried
out in the following order:
1. Aperture Adjustment sets
the correct light level in the
video signal (prior to performing
the colour check) by adjusting
the lens aperture.
2.
Colour Check allows
adjustment of the camera white
balance through fine adjustment of
the camera white balance controls.
1
12
2.. D
Diis
sp
plla
ay
y S
Sc
crre
ee
en
n A
Ad
djju
us
sttm
me
en
ntt
1
13
3.. C
Co
ollo
ou
urr A
Ad
djju
us
sttm
me
en
ntt
page 17 of 28
lens aperture
white balance
controls
Summary of Contents for SP 350
Page 1: ...User Guide SP 350...
