To set up for calibration, make the following checks:
a. Ensure your lighting is set up as for normal operation (see section 5
for further details)
b. Calibration is best carried out with the camera mounted on a tripod
as shown below.
c. You will need the calibration overlay, grey card and colour adjuster
which are all packaged with the camera.
d. Position the grey card in the intended focal plane. This is easiest
achieved by seating the grey card as shown above.
Note that the
recommended minimum distance from subject to lens is 1.3m.
e. Switch off the printer.
page 18 of 28
grey card
minimum 1.3m
Summary of Contents for SP 350
Page 1: ...User Guide SP 350...
