If using the on board strobe
unit provided, insert the
batteries provided by
pressing the locking
knob and opening the
compartment cover as
shown opposite.
Place the batteries as illustrated in the
compartment and replace the compartment
cover.
Tilt up the preview screen (1)
before sliding the on board
strobe unit on to the hot shoe
(2) as shown opposite.
Switch off the on
board strobe unit
when the camera is
not in use and remove
the batteries if you are not likely
to use for an extended period of time.
See on board strobe unit instructions for
further information.
Flood Lighting
When using flood lighting, the ideal set up is also with two lights
positioned as shown on the previous page. Ensure
flood lighting mode is selected on the printer front
panel as shown.
If backdrop lighting is used,
ensure balanced lighting of the backdrop and the
subject.
page 11 of 28
Summary of Contents for SP 350
Page 1: ...User Guide SP 350...
