Polaroid Originals OneStep+, User Manual

Page: 17 / 160

User Manual
17
The photo will be ejected from
the slot at the front of the
camera as soon as you let go
of the shutter button. It will be
shielded from the light by the
film shield, and will be held in
place until you are ready to
remove it.
8. Remove and shield the photo
Remove the photo from
beneath the film shield and let
the film shield roll back into the
camera. Place the photo face
down to continue shielding it
from light as it develops.
Further Guidance
Using the portrait lens
The has two high-
quality lenses; a standard
lens, intended for photographs
shot from 60 cm (2 feet) away
and further; and a portrait
lens, intended for photographs
shot from as close as 30 cm
(1 foot) away to 90 cm (3 feet)
away. To select the desired
lens, use the Lens Switch
located above the Lens Barrel.
Pairing with Bluetooth
®
The features
Bluetooth connectivity,
allowing it to be connected
to the Polaroid Originals
smartphone app, unlocking a
range of creative features. To
pair your with your
smartphone, press the Plus
button (located to the left of
the camera’s lens barrel) once.
The Plus button LED will flash
blue, indicating that it is in
pairing mode and waiting for a
new connection. Ensure your
phone’s Bluetooth is switched
on and open the Polaroid Origi-
nals app, choosing the
option. The camera
will connect automatically. Once
your camera and smartphone
are paired, the Plus button will
change to solid blue, indicating
that it is successfully paired.
To pair your with
a new device, ensure that
Bluetooth is switched off on
the current paired device, then
press and hold the Plus button
for 3 seconds. The Plus button
LED will flash blue, indicating it
is now in pairing mode.