Polaris trail boss 325, Owner'S Manual

Page: 169 / 189

158
MAINTENANCE
Headlight Lamp Replacement (Gen II)
1. Remove the seat.
2. Remove the plastic panel
surrounding the upper por-
tion of the gas tank by first re-
moving the gas tank cap.
3. Remove the Phillips head
screws on either side of the
panel at the junction of this
panel, the lower panels, and
the rear of the front fenders.
4. Remove the Phillips head
screws on either side of the
rear of the upper panel which
were revealed by the removal
of the seat.
5. Disengage the tabs at the
front of the upper panel
where they snap into the low-
er panel surrounding the
headlight assembly. Also dis-
engage the tabs on the upper
panel which engage with the
lower triangular panels on ei-
ther side of the machine. Lift
off the upper panel and set it
aside.
6. Reinstall the gas tank cap.
7. Remove the panel surrounding the headlight by removing the
Phillips head machine screws from either side of this panel.
Also remove the two Torx screws at the rear of this panel.
8. Ease the panel forward and up to allow you to reach the socket
connected to the headlight lamp.
3. & 4.
6.