Polaris trail boss 325 Owner'S Manual Download Page 71

Page: 71 / 189

CONTROL AND PARTS FUNCTIONS

Polaris 2-Cycle Lubricants

Polaris has a family of premium oils available for use in all our prod-

ucts and highly recommends their use. The only oils recom-

mended for Polaris 2-cycle ATVs are Polaris Premium 2-cycle oil

or Premium Gold Synthetic 2-cycle oil.
Polaris Premium 2-cycle lubricants are the most advanced for-

mulation of oils specifically designed for today’s 2-cycle engines.

Months of lab and field tests have resulted in a new generation of

2-cycle lubricants. Polaris Premium 2-cycle lubricants provide ad-

ditives for 2-cycle engines lacking in today’s fuel that keep ring

grooves cleaner for less ring sticking and provide improved overall

engine cleanliness. With new generation lubricity technology, they

excel in meeting the lubrication demands of today’s high perfor-

mance 2-cycle engines. These are optimum oils recommended for

liquid cooled and air cooled 2-cycle engines. We believe these oils

are the best available in the market today.

Premium Gold Synthetic 2-Cycle Oil

Your vehicle has been primed with Premium Gold Synthetic oil.

This lubricant has been specially formulated for low smoke, low

odor and high lubricity. We recommend continued use of this oil

or Premium 2-cycle oil.

Premium 2-Cycle Oil

Polaris also has a TC-W3 premium oil available for use in all of our

2 cycle products. We highly recommend its use if premium gold

synthetic is not used. The only oil recommended for this ATV is

Polaris brand oil.
Polaris Premium 2-cycle oils will readily mix with each other, how-

ever do not mix Polaris Premium 2-cycle oils with any other oils as

they may not be compatible and engine damage may occur.

Engine warranty coverage may become void if you use a

brand other than Polaris in your machine.

Summary of Contents for trail boss 325






























































































































































































Search results

Summary of Contents for trail boss 325

Reviews:

Related manuals for trail boss 325

Brands by name

Popular brands

Polaris trail boss 325, Owner'S Manual

Search results

Summary of Contents for trail boss 325

Reviews:

Related manuals for trail boss 325

Brands by name

Popular brands