Polaris Timbersled ST 120 RAW 2019, Owner'S Manual

Page: 53 / 70

EXTENDED STORAGE
Off-season or extended storage of your snow bike requires preventive measures
to aid against deterioration and to prolong the useful life of many components.
CLEANING AND PRESERVATION
Proper storage starts with cleaning, washing, and waxing the cowling, side
panels, chassis, and plastic parts. Wipe down remaining surfaces with a damp
cloth. Clean and touch up with paint any rusted or previously painted surfaces.
Be sure that corrosive salt and acids are removed from surfaces before
beginning preservation with waxes and rust inhibitors (grease, oil or paint).
The snow bike should be stored in a dry garage or shed, out of direct sunlight,
and covered with a fabric snow bike cover. Plastic tarp may cause condensation
to form and damage snow bike components.
TRACK AND SUSPENSION
Moderate track tension should be maintained during summer storage. The snow
bike should be supported off the ground to allow the track to hang freely.
TRANSPORTING THE SNOW BIKE
Whenever the snow bike is transported:
1. Be sure the fuel cap and oil cap are installed correctly.
2. Tie the snow bike to the transporting unit securely using suitable straps.
3. Remove the ignition key (if equipped) to prevent loss.
NOTE
Use of a cover is recommended when transporting your vehicle on an open
trailer.
51
MAINTENANCE