Polaris Timbersled ST 120 RAW 2019, Owner'S Manual

Page: 50 / 70

TRACK INSPECTION
1. Using a hoist, safely lift and support the rear of the snow bike off the ground.
2. Rotate the track by hand to check for damage.
3. Carefully examine the track along the entire length of each rod. Bend the
track to check for breakage.
4. Replace the track if any rod damage is found.
WARNING
Broken track rods can cause a rotating track to come off the snow bike, which
could cause serious injury or death. Never operate with a damaged track.
Never rotate a damaged track under power.
SKI MAINTENANCE
Timbersled recommends periodically inspecting your ski for damage.
• Check the ski bolt to make sure it is tight. Torque to specification.
TORQUE
45 Nm (33 ft. lbs)
WARNING
Failure to torque fasteners as directed will adversely affect the steering system
and may lead to severe injury or death.
• Inspect for cuts or peeled up plastic that will cause the ski to handle poorly.
• Inspect for bent, broken, or worn-out ski skags.
• Inspect the ski saddle for bends that may make the ski crooked.
• Inspect the ski rubber to make sure it is not smashed or worn out.
NOTE
Timbersled highly recommended that you DO NOT tie your bike against the
front of the ski. This can permanently bend the plastic ski causing your bike to
handle poorly.
48
MAINTENANCE