Polaris Timbersled ST 120 RAW 2019, Owner'S Manual

Page: 30 / 70

RYDE FX COIL OVER SHOCKS
All RAW models are equipped with Ryde FX coil over shocks specifically
designed for snow bike application. The Ryde FX shocks have no spring pre-
load, compression, or rebound adjustment. They come from the factory pre-set
with the best recommended settings.
FRONT TRACK SHOCK SPRING SETTINGS
NOTE
The Ryde FX shocks that come standard with all RAW models are pre-set with
the best recommended settings. FOX Zero Pro and FOX QS3 shocks are
available as accessory suspension upgrades.
Factory settings, combined with user adjustments to the front track shock spring,
should be all that’s necessary to provide the best riding experience for most
riders.
Always perform shock spring preload adjustments with the weight of the
vehicle removed from the shock and with the shock at full extension.
NOTICE
Never adjust spring preload to an installed length longer than the factory length
or shorter than the minimum length as shown in the following chart. Damage to
the suspension could result. When decreasing preload, make sure at least two
turns of preload are holding the retainer against the spring.
FACTORY SPRING MAXIMUM
INSTALLED LENGTH
MINIMUM INSTALLED
LENGTH
Ryde FX N/A N/A
FOX Zero Pro * 7–7/8” 7–7/16”
FOX QS3 * 7–7/8” 7–7/16”
* Can be offered as accessory suspension upgrade.
28
THE PERFECT FIT