Polaris Sportsman Touring XP 1000 EPS 2022, Owner'S Manual

Page: 101 / 156

OIL AND FILTER CHANGE
See the table on page 96 for fluid recommendations, capacities and plug
torques. Always change the oil and filter at the intervals outlined in the Periodic
Maintenance Chart. Always change the oil filter whenever changing oil.
1. Position the vehicle on a level surface.
2. Start the engine. Allow it to warm up at idle for two to three minutes.
3. Stop the engine.
4. Clean the area around the drain plug.
5. Place a drain pan under the crankcase.
6. Remove the drain plug. Allow the oil to drain completely.
CAUTION
Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
7. Install a new sealing washer on the drain plug. The sealing surfaces on drain
plug and crankcase should be clean and free of burrs, nicks or scratches.
8. Reinstall the drain plug. Torque to specification.
9. Remove the oil filter cover plate by loosening the three screws holding into
place.
10. Place shop towels beneath the oil filter. Using an oil filter wrench (available
from your POLARIS dealer), turn the filter counter- clockwise to remove it.
99
MAINTENANCE
Downloaded from ManualsNet.com search engine