Polaris Sportsman 9920775 Owner'S Manual Download Page 35

Page: 35 / 144

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Overloading the ATV or carrying/

towing cargo improperly.
WHAT CAN HAPPEN
Overloading and towing can

cause changes in vehicle

handling, which could lead to loss

of control or an accident.
HOW TO AVOID THE HAZARD
Never exceed the stated load

capacity for this ATV.
Cargo should be properly

distributed and securely attached.
Reduce speed when carrying cargo or pulling a trailer. Allow a greater

distance for braking.
Always follow the instructions in the owner's manual for carrying cargo or

pulling a trailer.

WARNING

POTENTIAL HAZARD
Operating on frozen bodies of

water.
WHAT CAN HAPPEN
Severe injury or death can result

if the ATV and/or the operator fall

through the ice.
HOW TO AVOID THE HAZARD
Never operate the ATV on a

frozen body of water.

Summary of Contents for Sportsman 9920775

















































































































































Search results

Summary of Contents for Sportsman 9920775

Reviews:

Related manuals for Sportsman 9920775

Brands by name

Popular brands

Polaris Sportsman 9920775, Owner'S Manual

Search results

Summary of Contents for Sportsman 9920775

Reviews:

Related manuals for Sportsman 9920775

Brands by name

Popular brands