Polaris Sportsman 9920775 Owner'S Manual Download Page 28

Page: 28 / 144

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Failure to use extra caution when

operating on excessively rough, slippery

or loose terrain.
WHAT CAN HAPPEN
Operating on excessively rough,

slippery or loose terrain could cause

loss of traction or loss of control, which

could result in an accident or overturn.
HOW TO AVOID THE HAZARD
Do not operate on excessively rough,

slippery or loose terrain until you've

learned and practiced the skills

necessary to control the ATV on such terrain.
Always use extra caution on rough, slippery or loose terrain.

WARNING

POTENTIAL HAZARD
Turning improperly.
WHAT CAN HAPPEN
Improper turns could cause loss of

control and lead to a collision or overturn.
HOW TO AVOID THE HAZARD
Always follow proper procedures for

turning as described in the owner's

manual.
Practice turning at slow speeds before

attempting to turn at faster speeds.
Never turn at excessive speed.

Summary of Contents for Sportsman 9920775

















































































































































Search results

Summary of Contents for Sportsman 9920775

Reviews:

Related manuals for Sportsman 9920775

Brands by name

Popular brands

Polaris Sportsman 9920775, Owner'S Manual

Search results

Summary of Contents for Sportsman 9920775

Reviews:

Related manuals for Sportsman 9920775

Brands by name

Popular brands