Polaris Sportsman 9920775 Owner'S Manual Download

Page: 26 / 144

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Attempting jumps and other stunts.
WHAT CAN HAPPEN
Attempting stunts increases the chance

of an accident, including an overturn.
HOW TO AVOID THE HAZARD
Never attempt jumps or other stunts.

Avoid exhibition driving.

WARNING

POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
Poor maintenance increases the possibility

of an accident or equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV before each use to

make sure it's in safe operating condition.
Always follow the inspection and

maintenance procedures and schedules

described in the owner's manual.

Summary of Contents for Sportsman 9920775

















































































































































Search results

Summary of Contents for Sportsman 9920775

Reviews:

Related manuals for Sportsman 9920775

Brands by name

Popular brands

Polaris Sportsman 9920775, Owner'S Manual

Search results

Summary of Contents for Sportsman 9920775

Reviews:

Related manuals for Sportsman 9920775

Brands by name

Popular brands