Polaris RZR 200 EFI 2021 Owner'S Manual Download

Page: 105 / 172

1. Shift the transmission to neutral. Set the parking brake.

2. Start the engine. Apply varying throttle for 10-15 seconds to expel the

moisture and air-dry the belt and clutches.

NOTICE

Do not hold the throttle pedal wide open for more than 5 seconds.

3. Allow the engine RPM to return to idle, then shift the transmission into gear.

4. Test the CVT system for belt slippage. If the belt slips, repeat the process or

remove the outer clutch cover to inspect the CVT system.

NOTICE

If the vehicle has ingested a large amount of water into the CVT system and

has not been operated for a period of time, be sure to check the CVT system

components for water damage.

103

MAINTENANCE

Summary of Contents for RZR 200 EFI 2021













































































































































































Search results

Summary of Contents for RZR 200 EFI 2021

Reviews:

Related manuals for RZR 200 EFI 2021

Brands by name

Popular brands

Polaris RZR 200 EFI 2021, Owner'S Manual

Search results

Summary of Contents for RZR 200 EFI 2021

Reviews:

Related manuals for RZR 200 EFI 2021

Brands by name

Popular brands