Polaris RANGER XP 900 Owner'S Manual For Maintenance And Safety Download

Page: 22 / 147

SAFETY

Safety Labels and Locations

Warning labels have been placed on the vehicle for your protection.
Read and follow the instructions of the labels on the vehicle

carefully. If

any of the labels depicted in this manual differ from the labels on your
vehicle, always read and follow the instructions of the

labels on the

vehicle

If an informational or graphic label becomes illegible or comes off, con-
tact your POLARIS dealer to purchase a replacement. Replacement

safety

labels are provided by POLARIS at no charge. The part number is

printed on the label.

Load/Passenger/Tire Pressure Warning

WARNING

• Passengers can be thrown off. This can

cause serious injury or death.

• Never carry passengers in cargo box.

WARNING

IMPROPER TIRE PRESSURE OR
OVERLOADING CAN CAUSE LOSS OF
CONTROL RESULTING IN SERIOUS
INJURY OR DEATH.

• Reduce speed and allow greater

distance for braking when carrying
cargo.

• Overloading or carrying tall, off-center,

or unsecured loads will increase your
risk of losing control. Loads should be
centered and carried as low as possible in box.

• For stability on rough or hilly terrain, reduce speed and cargo.
• Be careful if load extends over the side of the box.

RANGER

RZR

RZR 4

RZR XP

RZR XP 4

MAXIMUM CARGO BOX LOAD

300 lbs.

(136 kg)

300 lbs.

(136 kg)

300 lbs.

(136 kg)

300 lbs.

(136 kg)

TIRE PRESSURE IN PSI (KPa) FRONT 8 (55)

REAR 8 (55)

FRONT 10 (69)

REAR 12 (83)

FRONT 12 (83)

REAR 14 (97)

FRONT 14 (97)

REAR 16 (110)

MAXIMUM WEIGHT CAPACITY

INCLUDES WEIGHT OF

OPERATOR, PASSENGER,

CARGO AND ACCESSORIES

740 lbs.

(336 kg)

900 lbs.

(408 kg)

740 lbs.

(336 kg)

900 lbs.

(408 kg)

Read Operation and Maintenance Manual for more detailed loading information.

Load/Passenger/Tire Pressure

Warning

Summary of Contents for RANGER XP 900




















































































































































Search results

Summary of Contents for RANGER XP 900

Reviews:

Related manuals for RANGER XP 900

Brands by name

Popular brands

Polaris RANGER XP 900, Owner'S Manual For Maintenance And Safety

Search results

Summary of Contents for RANGER XP 900

Reviews:

Related manuals for RANGER XP 900

Brands by name

Popular brands