Polaris PVCR 0833 WI-FI IQ HOME, Operation Manual, Page: 28 / 140

28
allows you to stop the device.
3
. The Maximum cleaning mode will allow the vacuum cleaner to work with increased suction power. To
enable the mode, use the button on the remote control device.
4
. Using the button on the remote control device you can set the start time of the cleaning on the timer
(see Section 8). In this case, the current time must also be set (see Section 9).
When the timer is set, the vacuum cleaner will automatically turn on and start cleaning every day at the set
time. The I/O switch on the device should be turned on, the charging base should installed and connected.
5
. The device will automatically enter the sleep mode from the standby mode if you do not press the buttons
for 10 minutes. You can remove the device from the sleep mode by pressing the Auto button (Section 3).
Using the button on the remote control device you can enter the mode for setting the time the device
starts to work. The installation should be carried out by the buttons 4-7 of the remote control device. Click
again to save the setting. To delete the setting, set the time to 00:00.
6
. By pressing the button you can enter the current time setting mode, the installation should be carried
out using the buttons 4-7 of the remote control device. Click again to save the setting.
7
. The functions of the buttons 4-7 of the remote control device (up, down, left, right arrows) depending on the
selected mode:
Functions A are available when setting the operating time of the device or the current time
(see Sections 6, 7).
Functions B are available when the device is in cleaning mode.
А. Increased time on both the clock and the timer.
B. The choice of the straight movement direction of the device.
А. Reducing the time on both the clock and the timer.
А. Switching from the minutes register to the hours register
B. The choice of the left movement direction of the device
А. Switching from the hour register to the minutes register
B. The choice of the right movement direction of the device.
8
. To turn off the device, press and hold the Auto "button on the device for more than 3 seconds.
Note The set time on the clock or on the timer should be accompanied by a sound signal of the device. If
there is no sound signal your settings are not saved.
When replacing the batteries, the settings are busted. Remember to reset the time after replacing the
batteries.
Display symbols