Polaris PVCR 0833 WI-FI IQ HOME, Operation Manual, Page: 24 / 140

24

Remove all the accessories and the charger.

Make sure that all component parts are not damaged.

Install the side brushes. To do this, place the vacuum cleaner upside down, side brushes (2 pcs.) with the
hexagonal hole down. Remove the fixing screws of the side brushes from the brush shafts using a Phillips
screwdriver (not supplied). Put each brush on its axis (the brush with letter L on the left axis, the brush with letter
R on the right axis and tighten the screws with a slight effort.

Charge the battery before the first use. See the Section CHARGING THE BATTERY.
OPERATION
1. Install the dust-collecting container 16 assembled with the filters 13, 14, 15 into the compartment on the
back of the device (see section Description of the Device”).
2. Place the vacuum cleaner on the floor with the Auto on/off button up.
3. Turn on the device with the I/O switch on the device housing (located next to the adapter connection slot)
by moving it to the I position. (Fig. 4)
REMOTE CONTROL OPTION ADJUSTMENT AND USAGE.
This appliance feature the closed-loop remote control option implemented by means of a mobile device
through universal application Polaris IQ Home.
Download application Polaris IQ Home to your phone.
You can also download thew application by the link to web-site www.polar.ru in the section dedicated
to this version of vacuum cleaner.
This application enable you to:

Register your robot

Set a cleanup schedule, start, stop, or cancel vacuuming cycles

Adjust vacuuming settings

Trace the vacuuming progress

Name your robot

Get access to the appliance adjustment guidelines

Find answers to FAQ

Automatically update software

Contact the support service.
The vacuum cleaner Wi-Fi network connection setup