NRX-3
-
Display Feature Phone
8
visual indication. The Ringer Switch does not control this Ring Indicator Lamp.
2.21 Adjustable Ringing Tone Pitch
On the right side of the unit, there is also a switch that adjusts the ringing pitch
of incoming calls. From left to right it has three positions: low, medium and high.
Move the switch to the position you require.
2.22 Hearing – aid compatibility
The handset receiver is hearing aid compatible.
3. WALL-MOUNTING THE UNIT
The NRX-3 can be wall mounted using the wall mount bracket installed on the
bottom of the unit.
●
Dismount the wall mount bracket from the unit
●
Place the wall mount bracket to the required position on the wall
●
Drill two holes on the wall according to the distance as marked by two
mounting holes
●
Install the two screws supplied with the unit in the wall
●
Re-install the wall mount bracket to the bottom cabinet for the wall mount position
●
Position the wall mount slots on the bracket of the unit over the two screws
on the wall. Pull down the lock into place
●
Beneath the earpiece section of the cradle you will find a small tab. Pull this
up to form the hook for the headset.
●
When you are on the telephone, you sometimes need to put the handset
down for a moment. There is a special hook at the back (top) of the unit so
that you can hand the handset on the unit, when it is wall – mounted,
without terminating the call.
8933 NRX3_Brochure update.qxd 8/12/2003 2:03 PM Page 8
