that the telephone is in Speakerphone mode, an Icon will appear on the LCD.
It is possible to switch from Handset to Speaker during a call, by pressing the
‘Speaker/HS’ button then replacing the handset.
2.16 Headset Facility
The ‘SPEAKER/HS’ button enables you to use the telephone without lifting the
handset. Connect a headset and simply press the ‘SPEAKER/HS’ button once
to connect to the line. Pressing the ‘SPEAKER/HS’ button again will disconnect
the telephone line and terminate the call.
During a headset conversation, lifting the handset will switch the unit to the
handset mode. The headset will be disabled and the handset should be used
for conversation instead. The headset mode will be activated again by pressing
the ‘SPEAKER/HS’ button and replacing the handset.
2.17 Other Network Services
The NRX-3 is fully compatible with many telephone network services which
provide a number of useful additional facilities, including three way calling, call
diversion, call waiting etc. If you are connected to one of the digital exchanges,
you can access these services via the RECALL button on the keypad at Tone
mode. For further details, please contact your telephone service provider.
SET TO EARTH RECALL:
[PROGRAM] [PAUSE/LNR] [0] [PROGRAM] [RECALL]
SET TO TIME BREAK RECALL:
[PROGRAM] [PAUSE/LNR] [n] [PROGRAM] [RECALL]
NOTE: TBR Timing can be set by altering the value of n.
n=1 (100ms) n=2 (200ms) etc. up to 600ms.
The Telephone default setting is n=1 (TBR 100ms)
2.18 Last Number Redial
If you dial a number and find it is engaged or there is no reply, replace the handset.
The number will be retained in the memory until you dial a different number.
What to do:
Lift the handset or press ‘Speaker’
Press the ‘Pause/LRN’ button
2.19 Adjustable Volume Callers Voice
At the right side of the NRX-3 there is a slide control which can be used for
adjusting the speech volume level of the called party’s voice in all three modes
of operation – handset, loudspeaking and headset.
2.20 Adjustable Ringing Volume
On the right side of the unit is a switch, this adjusts the ringing volume of
incoming calls. From left to right it has three positions: off, low, high. Move the
switch to the position you require. In addition to the ringing tone there is a Ring
Indicator Lamp on the unit that will flash when the telephone is ringing as a
NRX-3
-
Display Feature Phone
7
8933 NRX3_Brochure update.qxd 8/12/2003 2:03 PM Page 7
