Page 5
English
CAUTION
Failure to comply with the following warnings could cause damage to pool equipment or personal injury.
•
The Polaris cleaner must be installed and operated as specified.
• This product is intended for use with permanently-installed pools. Do not use with storable pools.
A permanently-installed pool is constructed in or on the ground or in a building such that it cannot be
readily disassembled for storage. A storable pool is constructed so that it is capable of being readily
disassembled for storage and reassembled to its original integrity.
•
Clean the filter canister in the Polaris cleaner after each use.
• Do not use the product in your pool if the water temperature is above 95°F (35°C) or below 55°F (13°C).
USE OF THE POLARIS ROBOTIC CLEANER IN A VINYL LINER POOL
• Certain vinyl liner patterns are particularly susceptible to rapid surface wear of pattern removal caused by
objects coming into contact with the vinyl surface, including pool brushes, pool toys, floats, fountains, chlorine
dispensers, and automatic pool cleaners. Some vinyl liner patterns can be seriously scratched or abraded
simply by rubbing the surface with a pool brush. Ink from the pattern can also rub off during the installation
process or when it comes into contact with objects in the pool. Zodiac Pool Systems LLC is not responsible
for, and the Limited Warranty does not cover, pattern removal, abrasion or markings on vinyl liners.
SAVE THESE INSTRUCTIONS
2
Cleaner Specifications
General Specifications
The general specifications for the cleaner are as follows:
Control box
supply voltage
120 VAC; 50/60 Hz
Supply voltage
30 V DC
Operating power
150 W max
Cable length
82 ft (25M) or 100 ft (30M) depending on model
Cleaner size
(WxDxH)
17 x 12 x 19 inches (47 x 51 x 29 cm)
Weight of cleaner
26 lbs. (12 kg)
Packed weight
42 lbs. (19 kg)
Filtration
Dual filtration ultra-fine and general purpose extra
large canister
Cycle lengths
Variable programming
The cleaner is a double-insulated product. A double-insulated electrical appliance is one which has been
designed in such a way that it does not require a safety connection to ground. The basic requirement for
double-insulation is that no single failure can result in dangerous voltage becoming exposed so that it
might cause an electric shock and that this is achieved without relying on an earthed (grounded) metal
casing. This is achieved by having two (2) layers of insulating material surrounding live parts or by using
reinforced insulation. Therefore, devices having double-insulated construction, such as this cleaner, do
not use a grounded (three-prong) cord/plug.
