Page 15
English
the water. Never lift the cleaner out of the
pool by the floating cable or swivel.
2. Hold the cleaner vertically to drain
(Figure 10).
Figure 10. Keep Cleaner Vertical to Drain Water
3. Unplug power to the cleaner at the
control box (Figure 11).
Figure 11. Unplug
4. Remove the cleaner from the pool and
untangle all kinks and coils in the power
cable (Figure 12). Start at the cleaner
head. Lay the cable in the sun to loosen
any tangling memory.
Figure 12. Untangle
Clean the Filter Canister
The filter canister should be cleaned at the end of
each cycle.
1. Remove the cleaner from the water using
the Lift System and let the remaining water
drain.
2. Set the unit on four wheels.
3. Push the cover lock (1) and lift the cover
(2) until it is secured in the vertical position
(Figure 13).
1
2
Figure 13. Lift Cleaner Cover
4. Remove the filter canister assembly from
the body (3) as shown in Figure 14.
