E
23
2.
Review the devices that are
already installed to determine
the available ID assignments
for the new device.
Example: ID for Table Lamp is A01
(A = house code, 01 = device
code). A03 is first available code.
3.
Plug the receiver module into
any wall plug and the device
into the receiver.
4.
Use the dials on the front
of the PLC Receiver to set
the house code, A-D, and
device code, 1-16.
(Ex: A03)
5.
Move the cursor to the
name field next to the
code identifier position
to be assigned. (Ex: A03)
6.
Press <Enter> to select the item.
A line indicating the text field will
appear and the first character
position will flash.
7.
Enter the device name in the text
field using the up/down keys to
access the alpha-numeric characters.
Press the right arrow key to move to
the next letter position within the field.
Press <Enter> when naming
is complete.
8.
If a dimmer module is installed, use
the right arrow key to move to the
dimmer (Dim) check box and press
<Enter> to enable (check) dimming
control for the device.
The dimmer control provides various
settings between 0-100% to produce
low to bright light levels.
ID Name Dim
A01
Table Lamp
A02
Music
A03
A04
A05
A06
A08
X-10 Setup
Tue, Aug 03
2:04 pm
More
Field
Selected
ID Name Dim
A01
Table Lamp
A02
Music
A03
A04
A05
A06
A08
X-10 Setup
Tue, Aug 03
2:04 pm
More
ID Name Dim
A01
Table Lamp
A02
Music
A03
A04
A05
A06
A08
X-10 Setup
Tue, Aug 03
2:04 pm
More
Field
Selected
ID Name Dim
A01
Table Lamp
A02
Music
A03
A04
A05
A06
A08
X-10 Setup
Tue, Aug 03
2:04 pm
More
1
3
5
7
9
11
13
15
A
C
E
G
I
K
M
O
PLC
Receiver
Module
Lamp
Standard Wall
Receptacle
1
3
5
7
9
11
13
15
A
C
E
G
I
K
M
O
Device
Code
House
Code
1
3
5
7
9
11
13
15
A
C
E
G
I
K
M
O
PLC
Receiver
Module
Lamp
Standard Wall
Receptacle
1
3
5
7
9
11
13
15
A
C
E
G
I
K
M
O
Device
Code
House
Code