Page 7
2.
Secure the power cable hook and control unit hook
around the tubes using a screw and hand tighten
with the Torx
®
wrench (supplied with unit). Refer
to Figure 3.
3.
Secure the control unit hook using two (2) bolts
and two (2) nuts and tighten with Torx wrench.
Refer to Figure 4.
4.
Insert the upper tubes (handles) into the bottom
tubes on the cart as shown in Figure 5. Make
sure the upper tubes (handles) are in the proper
orientation and align the screw holes.
5.
Position the bottom power cable hook as shown
in Figure 6. Place the cable hook plate opposite
the power cable hook. Secure using a screw and
tightening with the Torx wrench. Refer to Figure 7.
6.
Secure the cable hook plate using two (2) bolts and
two (2) nuts and tighten with Torx wrench. Refer
to Figure 8. The transport caddy is now ready to
use as shown in Figure 9.
3
Figure 3. Install the Power Cable Hook and
Control Unit Hook
4
Figure 4. Secure the Hooks
5
Figure 5. Install the Handles
7
6
8
Figure 6. Position the Bottom Power Cable Hook
Figure 7. Secure the Bottom Power Cable Hook
9
Figure 8. Secure the Cable Hook Plate
Figure 9. Transport and Storage Caddy Assembled
English
Summary of Contents for 9300xi Sport
Page 2: ......
