background image

Aqua Vac Systems, Inc.
1711 Longwood Road
West Palm Beach, FL 33409

Attn: Warranty Records

PLACE

STAMP 

HERE

Mail today to –

Fold, stamp and mail, fax to 561-688-0217 or register on the web at www.aquavacsystems.com

Serial #_______________________________________________________MakoShark 2

(Stamped on the bottom of the base of the unit)

Registration of Warranty

This registration card must be mailed within 10 days of purchase to secure limited warranty.

FOR USE IN THE U.S.A. ONLY.

Name_____________________________________________________________________________________

Address___________________________________________________________________________________

City________________________________________________State___________Zip ____________________

Date Purchased____________________________________________________________________________

How many Aqua Vac units do you have?________________________________________________________

Is this replacing another pool vacuum?     Yes____    No____    If yes, what brand?______________________

Purchased from____________________________________________________________________________

City________________________________________________State___________Zip ____________________

The size of my pool is________________________________________________________________________

Have you seen us on the internet?    Yes____     No____

Summary of Contents for Mako Shark 2

















Reviews: