Polaris 800 switchback assault Owner'S Manual Download Page 27

Page: 27 / 124

SAFETY

Safety Labels and Locations

Track Warning

The track warning label is on the
rear tunnel:

WARNING

Stay clear of track. Do not sit on
seat back. Entanglement with
the track or a fall from seat back
may result in severe injury or
death.

Hot Surface Warning

The hot surface warning is on the
rear center of the tunnel.

WARNING

Hot Surface

Do Not Touch

Burns may result. Entire top of tunnel may be hot. Install only
accessories specifically approved for this model by POLARIS. Do
not place clothing, bags or cargo on tunnel. Do not cover this
label.

Track

Warning

Hot Surface

Warning

Summary of Contents for 800 switchback assault





























































































































Search results

Summary of Contents for 800 switchback assault

Reviews:

Related manuals for 800 switchback assault

Brands by name

Popular brands

Polaris 800 switchback assault, Owner'S Manual

Search results

Summary of Contents for 800 switchback assault

Reviews:

Related manuals for 800 switchback assault

Brands by name

Popular brands