23
FEATURES AND CONTROLS
Console
Direction Selector Switch
When the direction selector is in the center position, the
vehicle is in neutral. The vehicle will not move if the
accelerator pedal is depressed.
Push the top of the switch to choose forward operation. Push
the bottom of the switch to choose reverse operation.
If the switch is changed while the accelerator pedal is
depressed, the vehicle will not move in the new direction
until the pedal is released, then depressed again.
Tip:
The malfunction light will illuminate after reversing direction if
you fail to release the throttle pedal after changing the switch.
AWD Switch
The AWD switch has three positions: All Wheel Drive
(AWD), Differential Lock/Two Wheel Drive (2WD) and
Off (1WD/Turf Mode).
Press the top of the switch to engage All Wheel Drive
(AWD). See page
44 for operating instructions.
Move the switch to the center position to lock the
differential and operate in two wheel drive (2WD).
Press the bottom of the switch to unlock the differential
and allow the rear drive wheels to operate independently
(1WD). This mode of operation is well suited to turf
driving or when active traction is not needed.
See page 44 for Differential Lock operating instructions.
Forward
Neutral
Reverse
AWD
2WD
1WD/TURF